Chapter 7 Customizing the MT20X0
Introduction
This chapter includes information about customizing the MT20X0 for the end user. By default, the device launches
the shell program, Navigator.exe, which provides access to default demonstration applications. The out-of-the-box
view and startup was selected to demonstrate the capabilities of the device and is not intended to be used by end
users. It is highly recommended that the view of selected programs be altered to prevent tampering.
The following device programs and screens can be customized:
•
default startup program
•
Home screen/shell (Navigator.exe) view
•
Scan Item or Scan Inventory program
•
disable MT200X Scanner Services.
To Next Page
Loading...
