Operating the MT2070/MT2090 2 - 37
Channel
If Ad-Hoc mode was selected the Ad-Hoc Channel dialog displays.
Figure 2-40
Ad-Hoc - Channel Screen
Use the Ad-Hoc Channel dialog to configure the required information to create an Ad-Hoc profile. This dialog does
not appear if you selected Infrastructure mode. Select a channel number from the Channel drop-down list.
NOTE In the case of a country where DFS is implemented in band 5150-5250 MHz, Ad-hoc is not allowed and
the user needs to move and select a channel in the 2.4 GHz band.
NOTE Ad-hoc channels are specific to the country selected.
Table 2-6
Ad-Hoc Channels
Band Channel Frequency
2.4 GHz 1 2412 MHz
2
2417 MHz
3
2422 MHz
4
2427 MHz
5
2432 MHz
6
2437 MHz
7
2442 MHz
8
2447 MHz
9
2452 MHz
10
2457 MHz
11
2462 MHz
To Next Page
Loading...
