18
PRELIMINARY
Getting Started
Charging the Battery
New batteries are shipped partially charged. Before you
can use your phone, you need to install and charge the
battery, as indicated by the following instructions. Some
batteries perform best after several full charge/discharge
cycles.
4 Insert the teeth at
the bottom of the
battery door into
the slot at the base
of the phone, then
push the door down
and snap it into
place.
Do This
1 Plug the
travel
charger into
your phone
with the
release tab
facing up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates that the battery is
fully charged (
Charge Complete
), press the
release tab and remove the travel charger.
Do This
Release
tab