134
Adjusting Your Settings
Notes:
• Use a TSB-121 compliant cable (provided by the TTY
manufacturer) to connect the TTY device to your
phone.
• Set the phone volume to level 4 (middle setting) for
proper operation. If you experience a high number of
incorrect characters, adjust the volume as necessary
to minimize the error rate.
• For optimal performance, your phone should be at
least 12 inches (30 centimeters) away from the TTY
device. Placing the phone too close to the TTY device
may cause high error rates.
Set TTY Mode
When you set your phone to a TTY mode, it operates in
that mode whenever the TTY device is connected.
Find the Feature
M
>
Settings
>
Initial Setup
>
TTY Setup
Press To
1
S
scroll to
TTY Setup
2
CHANGE
(
+
) change the TTY mode
3
S
scroll to the TTY mode
4
SELECT
(
+
) select the TTY mode
To Next Page
Loading...
