118
no predefined template exist, the message
No Predefined will be displayed).
2. Scroll through the list and select the required template.
Press
to enter the Predefined Menu and select one
of the following options:
• View
• Edit. (In the example, a registration
message is displayed).
Editing a Predefined Template
Check with your Service Provider for the
types of predefined templates in your
terminal.
There are three types of predefined templates:
• Alphanumeric — enter characters and digits
• Numeric — enter digits
• Mixed — enter digits, *, and #.
The cursor is located before the first character. To move the
cursor forward, scroll right. The editor functions in overwrite
mode.
After editing a template, you can send it.
Sending a Predefined Template
1. Press Send, PTT or , or the relevant one-touch numeric
key to send the message.
2. The display will show one of the following delivery reports:
•
Message Delivered — to indicate that the message was
successfully sent and received.
•
Message Failed — the message was not received.
3. After sending the message, your MTP850 will return to the
A predefined message address is also defined by your Service
Provider during programming and cannot be changed.
MENU
Register
ABC 27|
Send Delete
6866537D80-A.book Seite 118 Freitag, 29. Juli 2005 4:15 16
To Next Page
Loading...
