Chapter 4
Getting Started
This chapter provides instructions on how to prepare your device for use.
4.1
Charging the Device
Procedure:
Perform one of the following actions:
Option Action
Using the USB-C charger Plug the charging cable to USB power
source.
For ongoing charging, your device shows the following indications:
•
The bar LED blinks rapidly for three minutes.
• The top and bottom crescent red LED illuminates.
If there is an error during charging, your device shows the following indications:
• For MUC charging, the top and bottom red crescent LED blinks.
• For USB charging, the bottom red crescent LED blinks.
4.2
Turning the Device On or Off
Turning the Device On
Procedure:
Press and hold the Power button.
If your device turns on successfully, your device shows the following indications:
MN009911A01-AA
Getting Started
17
To Next Page
Loading...
