• The device vibrates.
•
The two-bar LED illuminates and scrolls.
If your device fails to turn on, your device shows the following indications:
• The device vibrates.
• The top and bottom red crescent LED illuminates.
NOTE: Contact your dealer or administrator for more information regarding power on issue.
Turning the Device Off
Procedure:
Press and hold the Power button.
If your device turns off, your device shows the following indications:
•
The device vibrates.
• The top and bottom red crescent LED illuminates.
• The bar-LED turns off after countdown.
4.3
Adjusting the Volume
This settings allows you to adjust the device volume.
Procedure:
1 Perform one of the following actions:
• To increase the volume, press the Volume Up button.
• To decrease the volume, press the Volume Down button.
NOTE: Volume LED bar appears when you adjust the volume.
MN009911A01-AA
Chapter 4 : Getting Started
18