6809497A15-A January 31, 2006 33
Level 1 and 2 Service Manual Disassembly
4. Insert the tip of a thin bladed knife under the display lens starting under the
Motorola logo and pry it upward.
5. Slide the pointed edge under the edge of the display lens to separate it from
the flip assembly and remove it from the flip assembly.
6. Use the T-5 driver to remove the 2 flip assembly screws at the bottom of the
flip assembly. Set the screws aside for re-use unless they are damaged.
051244o
Figure 17. Removing the Display Lens
052145o
Figure 18. Removing the Bottom Flip Screws
Display lens
Flip Assembly
Knife
Flip screw
Flip screw
Flip Assembly
To Next Page
Loading...
