30 November 18, 2005 6809495A82-A
Disassembly V3i
3. Use the disassembly tool to release the antenna assembly as shown in Figure 8.
4. Carefully lift the antenna assembly away from the phone.
5. To replace, align the antenna assembly to the phone.
6. Carefully press the antenna assembly into position until the antenna assembly
latches snap into position.
7. Reinstall the rubber antenna assembly grommets into their slots. Each
antenna grommet is uniquely shaped to fit into its respective position.
8. Replace the rear housing assembly, SIM, battery and battery cover as described
in the procedures.
040712o
Figure 9. Removing the Antenna Assembly
Antenna
Assembly
Disassembly Tool
To Next Page
Loading...
