Motorola VL50

Programming Mode
26
Programming Microphone Gain
You can adjust the microphone sensitivity to suit different users or operating environments.
1. In programming mode, press
S
until g and ? display.
2. Press
[
or
]
to select the sensitivity level:
3 = High sensitivity, for quiet environments
2 = Medium sensitivity (default)
1 = Low sensitivity, for loud environments
3. Press and hold
Push to Talk to exit programming mode, or press
S
to continue
programming.
Editing the Scan List
For faster scanning and to avoid hearing unwanted transmissions, you can edit the scan list to
skip channels.
1. In programming mode, press
S until h displays and the channel number
and
Y or n flash.
2. Press
[ or ] to select the channel you want to remove from the scan list.
3. Press
T to display either Y to include the channel or n to exclude the
channel.
4. Press and hold
Push to Talk to exit programming mode, or press
S
to continue
programming.
VL50operation.fm Page 26 Tuesday, February 24, 2004 4:46 PM