June 22, 2006 41
Level 1-2 Service Manual Disassembly
PRELIMINARY
3. To replace, insert LCM module with a small angle into Case-B as shown in Figure 40.
4. Replace the PCBA, lower housing cover, battery, and battery door as described in the
procedures.
Disassembling and Assembling Case-B and Case-C
1. Remove the battery door, battery, lower housing cover, PCBA, and LCM shielding cover
as described in the procedures.
2. Push out the hinge to disassemble Case-B and Case-Cwith tweezer as shown in Figure 41.
Figure 40. Removing LCM Module
Figure 41. Removing the hinge
Push the hinge
To Next Page
Loading...
