EasyManua.ls Logo

Motorola WAVE TLK 100 - Antenna and Power Management; Antenna Installation; Turning the Radio On or Off

Motorola WAVE TLK 100
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting Started
This chapter provides instructions to prepare your radio for
use.
Attaching the Battery
1 Align the battery contacts with the contacts inside
the battery compartment.
a Insert the contact side of the battery first.
b Gently push the battery into place.
1
2 Attach the battery cover by aligning it in place and
slide the battery latch until it snaps into place.
3 Slide the battery latch into lock position.
Charging the Battery
Your radio is powered by a Lithium-Ion (Li-Ion) battery.
To comply with warranty terms and avoid damages,
charge the battery using a Motorola Solutions
charger exactly as described in the charger user
guide.
NOTICE:
All Motorola Solutions chargers can charge
only Motorola Solutions authorized batteries.
Other batteries may not charge. Motorola
Solutions recommends that your radio
remains powered off while charging.
For best performance, charge a new battery 4 to 5
hours before initial use.
English
17

Table of Contents

Other manuals for Motorola WAVE TLK 100

Related product manuals