Chapter 18
Area Talkgroup
When you enter a georgraphic area, you are able to view and hear the notifications for the talkgroup
area in that geofence.
The Area Talkgroup is added to the Area Talkgroup List in alpabertical order. Once you are added to
the Area Talkgroup list, your radio receives calls from both the Area Talkgroup and the talkgroup the
radio was on prior to entering the Area Talkgroup. To initiate an Area Talkgroup call, select the Area
Talkgroup using the Channel button.
When you are in the Area Talkgroup, your radio sounds the Voice Announcement, the green LED
blinks, and the display shows the talkgroup alias.
When you exit the Area Talkgroup, your radio sounds the Voice Announcement and the display shows
the talkgroup alias as well. If you are in a call when you exit the Area Talkgroup, the call continues
without dropping. When the call finally terminates, your radio then exit the Area Talkgroup.
If the Area Talkgroup is removed, you will go back to your previous channel.
MN006371A01-AA
Chapter 18: Area Talkgroup
30
To Next Page
Loading...
