SECTION 3 CONFIGURATION
3-10 SECTION 3, CONFIGURATION
Field or Button Description
Network Name
(SSID)
Enter a Network Name (SSID) of no more than
32 alphanumeric characters. This SSID must be
entered on every wireless device on your
wireless network to communicate with the
router. The default SSID is “motorola XXX”,
where XXX are the last 3 characters of your
Wireless MAC address, found on the label on
the bottom of the unit.
Channel Number Identifies the channel on which the router
communicates. Each wireless client must use
the same channel to enable communication.
This can only be altered from a PC that is wired
directly to the router, not wirelessly.
The default is Channel 11.
Operation Mode Enables you to select the type of transmission
protocol your wireless network uses. The
default is 802.11b/g
The options are:
! Compatibility (802.11b/g)
! Performance (802.11g only)
! Legacy (802.11b only)
Wireless MAC
Address
Displays the Wireless MAC address of the unit.
This is different that the WAN MAC address.
To Next Page
Loading...
