CONFIGURATION SECTION 3
SECTION 3, CONFIGURATION 3-31
Field Description
RIP V2 Enables or disables RIPv2.
The default is disabled.
Routing Table
Entry List
To add a Routing Entry:
1 Select a Destination IP number, which is
the Static Routing IP address.
2 Enter Subnet Mask and Gateway IP.
3 Select LAN & Wireless or Internet (WAN)
Interface.
4 Enter the Metric, or how many hops the
routing can take.
5 Click Apply to enter the Routing Entry into
the Routing Table.
6 To edit or remove an entry, click the
desired entry and perform the requested
action.
Networking - DDNS Settings
The router supports the Dynamic Domain Name System (DDNS)
feature. DDNS enables you to assign a fixed host and domain name
to a dynamic Internet IP address. It is useful when you are hosting
your own web server, FTP server, or another server behind the
router. Before you can use this feature, you must sign up for DDNS
service at a DDNS service provider, such as www.dyndns.org
or
www.changeip.com
. Once you have signed up, write down your User
Name and Password.
To access the screen, click Networking > Dynamic DNS. Click
Apply to save your settings or Cancel to cancel changes.
Field Description
DDNS Enables or disables DDNS. The default is
disabled.
To Next Page
Loading...
