Getting Started 1 - 15
Figure 1-18
Splash Screen
Figure 1-19
Start Up Window
Use the
Calibration screen to align the touch screen:
1. Carefully press and briefly hold on the center of the Calibration screen target. Repeat the procedure as the
target moves and stops at different locations on the screen. This enters the new calibration settings.
Figure 1-20
Calibration Screen
2. Once all of the new calibration settings are input, tap the screen or press the ENTER button to save the new
calibration settings. Press
ESC to discard the new calibration settings.
Voice Only WT4090 Boot Up
When the Voice Only WT4090 is powered on for the first time the three LEDs on the front housing blink as follows:
OEM VERSION 02.17.0001
OEM VERSION 03.17.0001
OEM VERSION 04.20.0004 or
05.30.0001
Calibration Screen Confirm Calibration
Screen
To Next Page
Loading...
