Motorola WT41NO - LED Indicators Explained

2 - 2 WT41N0 User Guide
LED Indicators
The Charge Status LED indicates the wearable terminal charging status when the WT41N0 is in a cradle. Table
2-1 describes the Charge Status LED indications.
Figure 2-2 Wearable Terminal LED Indicators
Table 2-1 Charge Status LED Indications
LED State Indication
Charge Status LED
(Amber)
Off Wearable terminal is not in cradle. Wearable terminal
not placed correctly. Charger is not powered.
Slow Blinking Amber Main battery in wearable terminal is charging.
Fast Blinking Amber Charging error:
• Temperature is too low or too high.
• Charging has gone on too long without
completing (typically eight hours).
Solid Amber Charging complete.
Note: When the battery is initially inserted in the
wearable terminal , the amber LED flashes once if the
battery power is low or the battery is not fully inserted.
Programmable LED1
(Light Green)
- Application dependent
Programmable LED2
(Green)
- Application dependent
Charge Status LED
Programmable LED2
Programmable LED1
DRAFT