Connect, share & sync
» Security: Select the type of security you want: WPA3-Personal,
WPA2/WPA3-Personal, WPA2-Personal or None. If prompted, enter a
unique password (8 characters min.) that others will need to access
your Wi-Fi hotspot.
» Hotspot password: Set or change your hotspot password.
Note: To turn o the hotspot automatically and manage allowed devices,
tap Advanced.
Connect with Bluetooth wireless
Turn Bluetooth on
To turn Bluetooth on, swipe the status bar down and touch . Touch and
hold it to open Bluetooth settings.
Note: Your phone automatically turns on Bluetooth when you connect to
a paired device.
Tip: To extend battery life or stop connections, turn Bluetooth o when
you’re not using it.
Connect devices
The first time you connect a Bluetooth device, follow these steps:
1 Make sure the device you are pairing with is in discoverable mode (for
details, refer to the guide that came with the device).
2 Swipe up > Settings > Connected devices > Pair new device.
3 With Bluetooth turned on, tap a found device to connect it (if
necessary, tap Pair or enter a passkey like 0000). You can tap
to
rename the device and choose what the device will be used for.
To automatically disconnect or reconnect a device, just turn the device
o or on.
Note: Using a mobile device or accessory while driving may cause
distraction and may be illegal. Always obey the laws and drive safely.
Share files
» Photos or videos: Open the photo or video, then tap > Bluetooth.
» Contacts: Swipe up > Contacts. Touch and hold a contact, then
tap
> Bluetooth.
Bluetooth tethering
To share your phone’s internet connection via Bluetooth, swipe up >
Settings > Network & internet > Hotspot & tethering and tap the
switch to turn on Bluetooth tethering.
To Next Page
Loading...
