34
Common Radio Features
Telephone Operation (Conventional and
Trunking)
You can use your radio in a manner similar to a standard telephone.
Answering a Telephone Call
Note: This section is only applicable for
trunking modes.
When your radio receives a telephone call:
• Telephone-like ringing sounds.
• PHN CALL and the present mode are
alternately displayed.
• The Call-Received status annunciator
(F) flashes in the display.
Note: Incoming phone numbers are not stored in the phone list.
1 Press the RESP softkey or the Call-Response preprogrammed
menu button.
Note: The Call-Received status annunciator is no longer
displayed.
2 Press the PTT button to talk; release the PTT button to listen.
3 Press EXIT or the Phone menu button to hang up. The radio
returns to the home display.
Note: For conventional mode, your radio behaves as in normal
dispatch call. When it receives a telephone call, the radio
immediately unmutes with the display blank.
RESP EXIT
CHAN TGRP ZONE H / L
To Next Page
Loading...
