Why my Mottura Rollbox 4110 Window Blinds system does not move?
If your Mottura Window Blinds system isn't moving, possible causes include incorrect wiring (check and correct the wiring by following the instructions in this manual), no electrical power (restore electrical power), a faulty motor unit (request a replacement of the motor unit), or incorrectly set limit stops (set the limit stops).
What to do if my Mottura Rollbox 4110 Window Blinds system does not stop at the correct position?
If your Mottura Window Blinds system isn't stopping at the right position, it might be due to incorrectly set limit stops (set the limit stops) or side guides not being parallel (reposition the guides so the distance from each other is the same at the bottom and top).
Why my Mottura Rollbox 4110 system stops after several consecutive movements?
If your Mottura Window Blinds system stops after several uses, the motor may have reached its maximum temperature limit. Allow the motor to cool off for a few minutes before attempting to operate the blind again.
How to fix lateral shifting of curtain in Mottura Rollbox 4110 Window Blinds?
If the curtain of your Mottura Window Blinds shifts sideways during movement, the box supports might be incorrectly attached. Reposition the supports to ensure the box is perfectly horizontal.
Describes the round headbox/cassette made of extruded aluminum.
Information on stainless steel side guides and brackets for attaching guides.
Details on the winding tube and bottom bar materials and dimensions.
Explains the motor operation, including voltage, frequency, and optional controls.
Describes upper and lower fixing methods and bracket types.
Illustrates the installation of Rollbox 4110, Version A, with dimensions.
Illustrates the installation of Rollbox 4110, Version B, with dimensions.
Illustrates the installation of Rollbox 4110, Version C, with dimensions.
Detailed exploded view showing all components of the Rollbox 4110.
Diagram illustrating the assembly and identification of Rollbox 4110 parts.
Detailed exploded view showing all components of the Rollbox 4130.
Diagram illustrating the assembly and identification of Rollbox 4130 parts.
General| Type | Roller blind |
|---|---|
| Fabric | Various fabrics available |
| Operation | Manual |
| Maximum width | 3000 mm |
| Maximum height | 300 cm |
| Applications | Indoor |
To Next Page
