55
CLEANING
Unplug the appliance before carrying out any
cleaning.
Turn the mincer head
AA
to the right and pull
towards you to detach it from the motor unit
FF..
To dismantle the mincer head
AA
, remove the
pusher
CC
and the tray
BB
, unscrew the nut
AA55
,
remove the disc
AA44
, the blade
AA33
and the
screw
AA22..
Handle the sharp parts with care.
Wash all of the parts in hot soapy water, rinse
and dry thoroughly.
Never let moisture into the motor unit
FF
.
Simply wipe with a slightly damp cloth.
Do not put the mincer head
AA
into the
dishwasher (that is, the body
AA11
, screw
AA22
, nut
AA55
, blade
AA33
,and discs
AA44
).
FFoorr tthhee UUKK oonnllyy::
After mincing meat or
sausage making, to avoid any cross
contamination from raw ingredients we
advise cleaning all parts with a sterilising
solutions such as Milton.
IF YOUR APPLIANCE DOES NOT WORK
ACCESSORIES
Check the connection.
If your appliance still does not work, for help and advice contact our Helpline (see list in the
service booklet).
0845 602 1454 - UK
(01) 677 4003 – Ireland
or consult our website – www.moulinex.co.uk
Citrus press
Steak Moulding System
KEBBE Accessory
Biscuit nozzle
Sausage stuffer
Vegetable cutter
Slicing drum
Coarse grating drum
Fine grating drum
Parmesan drum
Ice drum
Small hole disc (3 mm)
Medium hole disc (4.7 mm)
Large hole disc (7.5 mm)
You can customise your appliance and purchase the following accessories from a Moulinex
approved service centre.
ELECTRIC OR ELECTRONIC PRODUCTS THAT HAVE REACHED THE
END OF LIFE
EEnnvviirroonnmmeenntt pprrootteeccttiioonn ffiirrsstt !!
Your appliance contains valuable materials which can be recovered or
recycled.
Leave it at a local civic waste collection point.
To Next Page
Loading...
Need help?
General
