21
EN
o4. 4 blade cutter
o5. Discs
o5-1. Small hole disc: fine mincing
o5-2. Large hole disc: coarse mincing
o6. Nut
o7. Food pusher
p. Sausage nozzle
q. Cake nozzle
q1. Support
q2. Mould
r. Kebbe accessory
r1. Ring
r2. Nozzle
s. Spatula
t. Storage unit
CAUTION: the safety precautions are part of the
appliance.
Read them carefully before using your new appliance
for the first time. Keep them in a place where you can
find and refer to them later on.
- Before using for the first time, wash all of the parts in hot soapy water. Rinse and dry.
- Place the motor unit on a flat, clean dry surface.
- Plug in your appliance.
Starting your appliance
Electronic model:
- Pulse (intermittent operation): turn the knob (a6) to the "Pulse" position
By pressing successively for better control of some preparations.
- Continuous operation: turn the knob (a6) to the "1" position.
- Stop: turn the knob (a6) to the "0" position.
- Speed variator (a5): select the speed indicated or vary it during the preparation.
Two-Speed Model:
- Pulse (intermittent operation): turn the knob (a7) to the "Pulse" position by pressing
successively for better control of some preparations.
- Continuous operation: turn the knob (a7) to the "1" or " 2 " position depending on the
preparation.
The accessories supplied with the model you have purchased are shown on the label on
the top of the packaging.
FIRST USE