Assemble the Cloth Drawer
Attach the Drawer Stoppers (#j) in the locations shown
using Screws (#d), this will prevent the drawer from being
accidentally removed from the desk.
Place the assembled Cloth Drawer (#C) upside down on
the desk so that it is covering the Drawer Stoppers (#j)
and in between the pre-drilled holes on each side.
Attach the Cloth Drawer Brackets (#D) to the Desktop
using Screws (#d) so that they hold the Cloth Drawer
in place.
Unfold the Cloth Drawer (#C) and put in the rectangular insert.
C
C
16
j
d
1
2
3
4
5
d
D
To Next Page
Loading...