care Information
if your product is damaged in any way, or you’re not
sure how to use it, please consult our web support
(mountainbuggy.com/support).
caring for nano
™
• brush dirt off frame and wheels regularly.
• clean with non-abrasive household cleaner and a soft cloth.
• wash off sand and salt after visiting the beach.
• always dry frame if wet.
• fabrics can be sponge cleaned with warm water, using a
mild natural soap. do not use detergents or bleach.
• store in a well ventilated space, away from direct
sunlight (which can harm and fade fabric), and moisture.
• take care to avoid damage to foam rubber. foam rubber
is not under warranty.
• improper care will void any warranties. do not use the
nano
™
if deterioration is detected or suspected.
• always load / unload your child on level ground.
• ensure the brake is engaged during the loading and
unloading of child.
• care should be taken if the stroller is used on stairs.
recommended not to go up or down escalators.
• always use the safety strap.
• excessive wear can reduce effectiveness and safety.
• parts may need lubrication.
• inspect essential components for:
• fraying – especially webbing straps and
safety harness.
• wear – locks, snap fasteners, tyres, plastic and
moving parts.
• safety – locks must not be loose.
To Next Page
Loading...
