Need help?Do you have a question about the Mountfield BIO QUIET SHREDDER and is the answer not in the manual?
General| Brand | Mountfield |
|---|---|
| Model | BIO QUIET SHREDDER |
| Category | Paper Shredder |
| Language | English |
Warning symbol indicates potential personal injury or property damage if instructions aren't followed.
Read instructions, learn controls, keep children/animals away, user is responsible for accidents.
Do not tug or hold the connection cable taught; keep it away from the machine.
Wear protective gloves during cleaning and maintenance; disconnect plug before checks.
Install studs, legs, and shaft using provided nuts, washers, and screws.
Connect to 230-240 VAC socket with protective conductor, fused with 10A inert fuse.
Built-in protection stops motor if overloaded or jammed to prevent damage.
Do not grind glass, metal, plastic bags, stones, fabric, earth-covered roots, or wet kitchen waste.
Start the motor by pushing the green start button (F) as shown in fig. 4.
Never turn the twist switch (10) while the motor is running.
Engine must run, material feeding downwards. Turn screw (11) clockwise until scraping sound.
Keep air openings clean, check/tighten nuts/screws, spray spiral cutter with oil after use.
Never use a high-pressure washer or running water when cleaning the grinder.
Only genuine spare parts approved by the manufacturer can be used for repairs.
Hand over the product for recycling at an advised place, e.g., a municipal recycling station.
To Next Page