6. Controller
6.1 Specification
no
Item
Specification
MDC-26 series MDC-32 series
1 Input AC120VC / AC230V, 50/60Hz
2 Output DC38V 3.5A
3 Fuse 230V 25A
4 Operating environment
0 ~ 40℃ / 15 ~ 80% RH ( without dew )
5 Front panel
4.3” Color LCD with touch screen
6 Communication 1 x RS232C, 1 x Ethernet
7 Protocol Modbus
8 I/O 8 Input & 8 Output flexible I/O (25P D-Sub)
9 No. of program(Preset) 15
10
Torque calibration - 10% ~ +10%
11
Screwdriver recognition
Auto detection of connected driver when power ON
of controller
12
Error display Error code display ( 3 groups )
13
Fastening verification
Fastening data verification (NG/OK) by the preset
pattern of angle.
M D C 2 6
Available screwdriver model ( 26:MD22xx & MD26xx, 32:MD32xx )
Tool series
6.2 Model specification
mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
To Next Page
Loading...