Mountz MDC-26 - Page 36

Torque 137 Auto
Torque min/max (%) 138 0
Target angle(degree) 139 0
Min angle(degree) 140 0
Max angle(degree) 141 0
Snug torque(%) 142 0
Speed (rpm) 143 Auto
Free fastening angle(degree) 144 0
Free fastening speed(rpm) 145 0
Soft start(1-300ms) 146 0
Seating point (%) 10-90 147 Auto
Torque rising rate(ms) 50-200 148 50
Ramp up speed(rpm) 20-80% of max 149 Auto
Torque compensation (%) 90-110 150 100
11
TC/AM_AC/TM 151 0
Torque 152 Auto
Torque min/max (%) 153 0
Target angle(degree) 154 0
Min angle(degree) 155 0
Max angle(degree) 156 0
Snug torque(%) 157 0
Speed (rpm) 158 Auto
Free fastening angle(degree) 159 0
Free fastening speed(rpm) 160 0
Soft start(1-300ms) 161 0
Seating point (%) 10-90 162 Auto
Torque rising rate(ms) 50-200 163 50
Ramp up speed(rpm) 20-80% of max 164 Auto
Torque compensation (%) 90-110 165 100
12
TC/AM_AC/TM 166 0
Torque 167 Auto
Torque min/max (%) 168 0
Target angle(degree) 169 0
Min angle(degree) 170 0
Max angle(degree) 171 0
mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
36