Mountz MDC-26 - Page 8

● Straight hand-held (Lever start)
Model
Torque(lbf.in)
Speed range Bit socket Controller
MD2601
0.26 - 3.47
150-2000 Hex1/4” or dia.4
MDC-26
MD2602
0.43 - 6
150-2000
Hex1/4” or dia.4
MD2604
1.73 - 12.1
150-1500 Hex1/4”
MD2611
3.47 - 29.51
100-900
Hex1/4”
MD2616
4.34 - 43.4
100-620
Hex1/4”
MD3201
0.86 - 10.41
150-2000 Hex1/4”
MDC-32
MD3202
1.73 - 19.09
150-2000
Hex1/4”
MD3204
3.47 - 34.72
150-1500
Hex1/4”
MD3208
6.07 - 65.1
50-950
Hex1/4”
MD3210
6.94 - 75.51
50-750
Hex1/4”
MD3211
8.68 - 78.12
50-690
Hex1/4”
MD3216
17.36 - 121.52
50-470
Hex1/4”
MD3236
34.72 - 243.04
50-210
SQ3/8
MD3264
69.44 - 434
50-115
SQ1/2
● Pistol grip hand held (Trigger start)
Model
Torque(lbf.in)
Speed range Bit socket Controller
MDP3201
0.86 -10.41
150-2000 Hex1/4”
MDC-32
MDP3202
1.73 - 19.09
150-2000
Hex1/4”
MDP3204
3.47 - 34.72
150-1500
Hex1/4”
MDP3208
6.07 - 65.1
50-950
Hex1/4”
MDP3210
6.94 - 75.51
50-750
Hex1/4”
MDP3211
8.68 - 78.12
50-690
Hex1/4”
MDP3216
17.36 - 121.52
50-470
Hex1/4”
MDP3236
34.72 - 243.04
50-210
Hex1/4”
MDP3264
69.04 - 434
50-115
SQ3/8
Note: All Torque ranges are calculated using Mountz Torque Tester EZtorQII with Metric
Screw Blocks indicated below.
Screw RDA - M2
(Allen Hex 1.5mm)
Screw RDA - M3
(Allen Hex 2.5mm)
Screw RDA - M4
(Allen Hex 3mm)
Screw RDA - M6
(Allen Hex 5mm)
Screw RDA - M8
(Allen Hex 6mm)
Screw RDA - M12
(Allen Hex 10mm)
mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
8