Need help?Do you have a question about the Mousetrapper Advance 2.0 and is the answer not in the manual?
Connect the supplied cable to the Mousetrapper and a USB port. The device operates as shown in figure 2 once installed.
Configure for Mac by pressing lower right and left buttons for 3-4 seconds. LED flashes red to confirm.
Place Mousetrapper between you and keyboard. Space bar should align with control pad.
Scroll by sliding finger on the control pad's right edge without pressing down.
Replace worn pads by inserting a flat tool to gently prise frame/pad out. Order new pads from dealer.
Customise button functions by downloading MTKeys software from mousetrapper.com/mtkeys.
General| Interface | USB |
|---|---|
| Plug and Play | Yes |
| Product color | Black, Turquoise |
| Buttons quantity | 6 |
Weight and Dimensions| Depth | 110 mm |
|---|---|
| Width | 480 mm |
| Height | 20 mm |
| Weight | 670 g |
To Next Page
