Need help?Do you have a question about the Movcam MCS-1 and is the answer not in the manual?
Auto calibration for motors is available by pressing the blue function button on the MCS display.
Calibrate individual motors by pressing the RED button on the UM3 motor for 3 seconds.
Access zoom speed/ZAP function and program motor travel range limits using the red multifunction button.
Program up to 10 marker points on the focus scale, each with a different color.
Enable lens mapping or change scale display to percentage via the MCS menu.
Adjust hand wheel tension using a 2.5mm hex wrench for desired dampening.
General| Category | Camera Accessories |
|---|---|
| Type | Wireless Lens Control System |
| Material | Aluminum Alloy |
| Frequency | 2.4 GHz |
| Battery Life (Transmitter) | Up to 8 hours |
| Control Channels | Focus, Iris, Zoom |
| Wireless Range | 100 meters |
To Next Page