EasyManua.ls Logo

Movesafe MS-515SDV - System Parameter Settings - Navigation; Setting Item Selection and Adjustment

Default Icon
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CDuring pausing play, short press down button“ ” or up button“ ” to achieve upward or
downward play photos.
5) Audio playback: refer to “Mode transfer” chapter, short press mode button“ to audio
playback mode, purple indicator will be constantly on. And then press up button“ ” or down
button“ ” for browsing. Short press enter button“ ” into playback interface and short press
enter button“ ” again to playback audios. During playback, buttons function as following;
AShort press enter button“ ”, pause or resume play.
BLong press enter button“ ”, return to previous layer menu.
CDuring audio playing, short press down button“ ” or up button“ ” to achieve fast forward
or backward play audios.
Notes:
1) If the capacity of video files is too big, it would be normal condition to wait some seconds
to play the video.
2) When the unit is in the video playing state, you could adjust the TV volume to get a better
audio quality.
3) During playing, HDMI cable is recommended to achieve better audio and video effect.
4) After connect with AV&HDMI cable and turn on, unit will enter into mode 1 automatically.
Press mode button“ ”, unit will circle in below 4 modes;
Mode 1: Standby mode of video recording, blue indicator will be constantly on.
Mode 2: Standby mode of photo taking, red indicator will be constantly on.
Mode 3: Video and picture taking playback mode, purple indicator will be constantly on.(In this
mode, press mode button“ ” into next mode.)
Mode 4: Audio playback mode, purple indicator will be constantly on.(In this mode, press mode
button“ ” into next mode.)
16. Shoot when connect to TV
Please refer to “TV playback function” chapter, well connect the AV or HDMI cable, you could
operate the TV output for video and photo-taking function.
17
System parameter setting
> Please refer to “TV playback function” chapter, via AV or HDMI cable, connect to TV, unit
enters into standby mode. Long press enter button“ ”, TV will show system parameter setting
interface. Buttons functions as below:
AShort press enter button“ ” to select & quit setting items.
BShort press up button“ ” to upward correct setting item, and short press down button“
to downward correct setting item.
CLong press enter button“ ” to quite and save setting items.
Setting illustration:
>RESOLUTION: 720P30fps720P60fps1080P30fpsFULL HD30fps initial setting is 720P
60fps
A720P30: 1280*720P 30fps,
B720P60: 1280*720P 60fps, suits for outdoor extreme sports video recording. We suggest