6. Audio recording
When the unit in the sate of turning on, short press mode button“ ” to audio recording
standby mode. Short press execute button“ ”, unit will vibrate one time, and then the purple
indicator would flash slowly and unit begin to record audio. Short press execute button“ ”
again, unit vibrates again, that means the audio recording is finished and save the file
successfully, and then the purple indicator would be constantly on state.
Notes:
1) Please remove the waterproof cover in the backside of the unit for a better audio quality
during audio recording.
2) When microSD card is full, battery used up or standby mode for 3 minutes(time slot can
be set up), unit will shut down automatically.
7. LED and Laser light
> Unit provides 2 high brightness LED lights and 1 laser light.
> In any turning on state (except TV-out playback mode), short press LED light button“ ” the
LED light and laser light will circle in below five modes:
Mode0: All light go out. (Unit would enter into this mode after turn on)
Mode1: The laser light would light up for 30 seconds for the purpose of positioning the object,
and then laser light will go out.
Mode 2: The LED lights are on for the purpose of video recording and strength the color quality
in the dark place condition.
Mode 3: The laser light is on for positioning in all the recording state.
Mode 4: The LED lights keep quickly flash in a high frequency to save flashlight energy.
Notes:
1) Each time the unit will vibrate after you successfully press the operation button.
2) In any mode, long press LED&laser light button“ ”, the unit will transfer to mode0 (all
lights go out).
3) The consequence of the mode circle is : mode 0->mode 1->mode 2->mode 3->mode
4->mode 0
8. Flashlight and laser positioning function
The unit has the single flashlight and laser positioning function. When this single function
works, the DV system would come to the state of turning off, it would help to get more longer
time for the usage. The way to operate as below details:
> Long press LED/laser light button“ ”, flashlight is lit up, short press LED&laser light
button“ ”, unit will circle in below 5 modes:
Mode 0: Torch state: Flashlight is lit up and can be working up to 10h.
Mode 1: The laser light is on for positioning purpose.
Mode 2: The LED lights keep quickly flash in a high frequency to save flashlight energy.
Mode 3: Laser light flashes slowly for intermittent laser positioning.
Mode 4: Turn off all LED lights.
To Next Page
Loading...