Memorize position
①
Adjust the desk to the desired height, then press “
S”
for 3-5 seconds. The digital display will flash
for 5 seconds.
② Press 1 or 2 or 3 or 4 to assign the desk's position to the respective button.
*Note: If you don't finish this procedure within 5 seconds, the TDH6 will log out memory setting
mode automatically.
③ Press and hold button 1 or 2 or 3 or 4 to move the desk to memory position.
◼ Stored position can only be overwritten, not to be cleared.
To Previous Page
Loading...