9
SR-P Lite Racing Pedals
03
v High-strength Steel Pedals
v High Precision Hall Sensor
v Compatible with a variety of setups
v Adjustable Pedal Spacing
v Detachable Pedals
v Pedal Input Adjustable (Software)
1. Install the pedals onto the included footrest using the mounting holes. Use a 2.5mm
hexagon wrench to fix the M4*10 screws into the footrest. To ensure stability and that the
pedals will remain secure, it is recommended to use all four screws and install firmly.
2. Connect the pedal wires to the corresponding included interface, using the wire clip
under the pedal base to clamp the wires, preventing them from coming loose or interfer-
ing with product use.
Pedal Installation Process
Throttle Interface
Clutch interface
wheelbase interface
Product Description
To Next Page
Loading...