11
Packing List
04
Plate Height Adjustment
Product Parameters
v R5 Direct Drive Wheelbase
v ES Steering Wheel
v SR-P Lite Racing Pedals
v 15 Degree Desk Clamp
v Power Adapter
v Power Cord
v Wire Harness x2
v Screws (multiple sizes)
v Spanners (multiple sizes)
v Nuts
v M6 Flat Pad x4
v Moza Logo Stickers
Using a 2.5mm hexagon wrench, adjust the screws on the pedal board counterclockwise,
then use a 7mm open-end wrench to remove the back nut and board screw. You may then
move the board up and down to adjust the height according to your needs, then screwing
the back nut and board screw back into place. Adjustments to the throttle, brake and
clutch are done in the same way.
Pedal Material: High-strength Steel
Panel Material: High-strength Steel
Color: Black
Throttle Sensor: Hall Sensor
Pedal Spacing: Adjustable
Pedal Height: Adjustable
Pedal Input Adjustment: Software Supported
Pedal Reversable Function: Supported
Pedal Output Curve Adjustment: Software Supported
Anti-slip Pedal Bottom: Included
To Next Page
Loading...