To Next Page

To Previous Page

APPLIANCE OVERVIEW

1. Funnel storage seat

2. Funnel

3. 185 ml measuring cup

4. Top lid handle

5. Waﬄe maker indicator lamps

a. Mains power on

b. Operating status (heating ﬁnished)

6. Waﬄe maker heat plates

7. Power cord storage

8. Top lid

9. Latch

10. Heat plate vent

BEFORE FIRST USE

1. Remove the waﬄe maker from the box and discard all bags, stickers and polystyrene ﬁllers.

2. Remove the funnel (2) from the funnel storage seat (1) underneath the waﬄe maker: Twist the

funnel until its handle is aligned with the open padlock mark underneath the waﬄe maker.

3. Wash the waﬄe maker heat plates (6), the funnel (2) and the measuring cup (3) as explained

in Section "CLEANING AND MAINTENANCE".

CAUTION! Before cleaning the waﬄe maker, make sure it has been unplugged from the mains.

4. Mount the funnel (2) on the top lid by aligning the two bosses at the funnel's mouth with the

slots on the lid; next, twist the funnel until its handle is aligned with the closed padlock mark

on the top lid.

5. Place the waﬄe maker on a ﬂat, ﬁrm, stable and level surface.

Questions and Answers:

Need help?

Do you have a question about the MPM MGO-31M and is the answer not in the manual?

MPM MGO-31M Specifications

General