19
Allow warm food to cool down first before placing it in the device to keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooler unit open for longer than necessary.
Remove individual drinks bottles through the bottle hatch, if present.
5.2. USING THE COOLER IN DC MODE
h Place the cooler on a firm base.
h Connect the DC cable to the cigarette lighter or the DC socket in the vehicle.
h Push the switch on the control panel to HOT or COLD to switch the cooler on.
3 The indicators on the control panel show you the operating mode:
Operating display Operating mode
Red Heating
Green Cooling
3 The cooler starts cooling/heating the interior.
h To switch off the cooler,
− push the switch on the control panel from HOT or COLD to the OFF position,
− disconnect the plug.
5.3. USING THE COOLER IN AC MODE
h Place the cooler on a firm base.
h Connect the 220-240 V connection cable to the AC mains.
h Push the switch on the control panel to HOT or COLD to switch the cooler on.
h When the cooler is connected to a 220-240 V AC mains supply, it can be used in two
different operating modes:
ECO mode (for AC 230V supply): the cooler consumes less energy
MAX mode: the cooler reaches maximum cooling capacity
3 The indicators on the control panel show you the operating mode:
Operating display Operating mode
Red Heating
Green Cooling
3 The cooler starts cooling/heating the interior.
To switch off the cooler, push the switch on the control panel from HOT or COLD to the OFF
position.
MPM-35-CBM-09YA_instrukcja_v01.indd 19MPM-35-CBM-09YA_instrukcja_v01.indd 19 06.10.2023 12:52:0006.10.2023 12:52:00
To Next Page
Loading...
Need help?
General
