EasyManua.ls Logo

MPM MUG-15 - Electric Heater Information Requirements

MPM MUG-15
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
GB
3. Set the desired heating power by rotate ON/OFF switch (3) given that:
One heater enabled - 400W
Two heaters enabled - 800W
4. To turn off the radiator, deactivate all active lamps, then disconnect the radiator from the
mains and wait until it cools down.
SAFETY
1. The quartz radiator has a position control fuse (4) which activates automatically if the radiator
is placed on an unstable or uneven surface, or accidentally tilts.
2. The appliance is composed of heat-resistant, non-flammable materials. It features a thick tri-
agonal protective grid which guarantees safety when the heater is in use.
INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATERS:
Model identifier: MUG-15
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local space
heaters only
Nominal heat output Pnom 0,800 kW manual heat charge control, with integrated
thermostat
NO
Minimum heat
output (indicative)
Pmin 0 kW manual heat charge control with room and/or
outdoor temperature feedback
NO
Maximum continu-
ous heat output
Pmax,c 0,800 kW electronic heat charge control with room and/or
outdoor temperature feedback
NO
Auxiliary electricity consumption fan assisted heat output NO
At nominal heat
output
el
max
N/A kW Type of heat output/room temperature
control
At minimum heat
output
el
min
N/A kW single stage heat output and no room tempera-
ture control
NO
In standby mode el
SB
N/A kW two or more manual stages, no room tempera-
ture control
YES
with mechanic thermostat room temperature
control
NO
with electronic room temperature control NO
electronic room temperature control plus day
timer
NO
electronic room temperature control plus week
timer
NO

Related product manuals