EasyManua.ls Logo

MPMan TPM 500 - MP3 Mode Controls; MP3 Navigation and Speed; MP3 Volume Adjustment; MP3 EQ and Repeat Settings

MPMan TPM 500
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Power off: under playing or pause or stop status, continuously press button until the
LCD display OFF. Then release the button the unit is power off
Note: under pause or stop status, the unit will automatically power off if no operation
was conducted within 3 minutes.
3.3 previous / next file, FF/RW
Under playback status, shortly press - button to skip to the previous file; shortly press +
button to skip to the next file.
Under the state of playback, press “-” to skip to the previous file; press “+” to skip to the
next file; press and hold “+” to FF, press and hold “-” to RW.
3.4-volume adjustment
Press and hold “Mode”, a shine line will appear below the turntable of LCD. Press and
hold “+” to increase the volume, while continuously press “–“to decrease the volume.
And the volume indicator on the LCD will change accordingly.
3.5-EQ Mode selection
Shortly press EQ button to select EQ modes 1-7, which correspond to NATURAL,
ROCK, POP, CLASSIC, SOFT, JAZZ, and DBB effect.
3.6-REPEAT modes selection
Shortly press REP button to select repeat mode: no repeat, single repeat, and repeat all.

Related product manuals