Mpow BH045 User Manual

Connect BH045 to a Non-Bluetooth multimedia audio
device (such as 1V. PC) with a 35 mm audio cable. RCA
cable. Then. pair BH045
to a Bluetooth headphone/
Bluetooth speaker. In this way, BH045 can transmit music
from a Non-Bluet:ooth multimedia audio device (such as
1V, PC) to a Bluetooth headphone/ Bluetooth speaker
etx:.
8.1 Pair with One Bluetaoth Headphone
•
Stepl,
Connect BH045 to the Audio output port of a Non-
Bluetooth
multimedia audio device (such as 1V. PC)
with a 35 mm audio cable or RCA cable.
•Step:Z, [:§]
Select a mode: tum the switch
to iX" to enter Bluet:ooth lX mode. TX
• =,; on BH045 by long pressing ·@)· button fbr 3
seconds
with Green indicator light flashing quickly.
• Stap4,
Pair. When the Green indicator light flashes quickly,
BH045
will enter Bluetooth pairing mode (Short
press·~- button to enter paring modei
• StapS,
Enable Bluetooth on Bluetooth headphone/ Bluet:ooth
speaker. Get
it close to BH045 within 1 meter. It takes
5-30 seconds to complete the automatic connection
to the Bluetooth headphone/ Bluetooth speaker.
• Stap6,
Play music /video on your computer or television.
Then.you can
enjoyyourtime.
After the successful pairing. BH045 Green indicator light
will remain on.And the codecs of BH045will change
according to the Bluetooth headphone as below.
Codec
of one connectad device
Your Headphone
the final transmission lheaudio
supports
Codec will be delaywill be
aptXHD aptXHD
I
apt)( Low Latency
aptX Low Latency
<-40ms
apt)( apt)(
<-130ms
SBC SBC
<-220ms
/70

Mpow BH045 Specifications

General

Brand	Mpow
Model	BH045
Category	Receiver
Language	English