Mpow BH045

I
Step 3: Check whether BH045 is in pairing mode
(Green or Blue indicator light flashes quickly).
Short press·(@)"button to enter pairing mode.
Step 4: In RX mode, check whether }Our smartphone
can search the Bluetooth name. If not. disable
and enable Bluetooth on your smartphone. In
lX mode, check whether :your Bluetooth
headphone is in pairing mode. If not set the
Bluetooth headphone to pairing mode
according to its instructions.
Step 5: Long press"(@l"for 8 seconds to clear the paring
information on BH045 and try pairing again.
Clear
the Bluet:ooth pairing list on the smartphone and
Bluetooth headphone cy' the instructions of the
smartphone or Bluetooth headphone.
Take Bose QC 35 II for example, turn the switch to the
Bluetooth icon. Long press for 1 Os until you hear
"Bluetooth device list cleared" {Bluetooth pairing list
have been erased) and the Bluetooth indicator light
flashes in blue.
• Why is the music qualil;y poor?
Step
l: Ensure tvvo ends of the 3.5 mm cable are firmly
connected.
Step 2, Check whether the AUX cable is fully plugged in.
Step 3: Change a 35 mm audio cable.
Step 4: Try another Non-Bluetooth device.
• Why is the connection short-distanced and
intermittent?
Bluetooth is a short-distanced wireless technology.
When too much obstructions are nearby. such as
Bluetooth devices. wireless signals. walls. they will disturb
the transmission.
Step 1: Maybe the device exceeds the Bluetooth distance.
Come back to the effective distance. Maybe it's
obstructed by the wall. please use BH045 in a
spare place.
Step 2: The wireless signal will disturb the Bluetooth
connection. Please use the BH045 in an
environment without strong obstruction.
/77