EasyManua.ls Logo

mPTech myPhone Halo 3 LTE - <#> button; Torch On; Off; Camera; SOS button

mPTech myPhone Halo 3 LTE
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN © mPTech 2023. All rights reserved. Halo 3 LTE
28
your hand.
21
Volume
Up/Down
Buttons
Allows you to increase or decrease
the volume of a phone call or radio.
22
Strap hole
Allows you to attach a lanyard to
the phone.
Turning the phone on/off
To turn the phone on/off press and hold Red handset until the
phone switches on. If directly after turning the phone on you will
see the PIN code request, (in form of “****”) type the code and
press button Menu.
Inserting SIM card(s), memory card and battery
If the phone is switched on - switch it off. Remove the back cover
of the phone - use your fingernail to raise it using the gap in the
case and remove the battery. Insert the SIM card(s) - place the
SIM card(s) with its (their) golden contacts facing down as the
recess is embossed.
Insert the memory card - to open the cover of the card reader
slide it gently up. Insert the microSD memory card with its gold
contacts facing down, the way in which the slot is made. Close the
flip by sliding it delicately downwards. Insert the battery so that
its gold contacts touch the tripple connector in the phone bay. Put
on and gently press down the cover until you hear the click of the
latches. Make sure the cover is well attached.

Table of Contents

Related product manuals