Need help?Do you have a question about the MR RS 2001 and is the answer not in the manual?
Specifies the applicable types of protective relays covered by this technical file.
Provides contact details for the manufacturer of the protective relay.
Informs users about potential modifications to technical data and design.
States that the technical file is incomplete without supporting documents.
Advises to keep the technical file and supporting documents accessible for future use.
Explains symbols, signal words, and pictograms used in the document.
Details the format for displaying warnings related to dangers and instructions.
Describes how information is presented to simplify understanding of procedures.
Explains the structure of single-step and multi-step instructions provided in the document.
Defines the intended use of the protective relay and conditions for safe operation.
Outlines essential safety measures to prevent accidents, damage, and environmental harm.
Specifies requirements for personnel involved in assembly, commissioning, operation, and maintenance.
Details necessary personal protective equipment (PPE) to minimize health risks during work.
Provides information and precautions for drying the transformer in a furnace or tank.
Instructs on precautions to take when drying the transformer within a furnace.
Explains the procedure for drying the transformer while it is fitted in the transformer tank.
Lists the items included in the product packaging and delivery.
Explains how the protective relay operates to protect the on-load tap-changer and transformer.
Describes the physical design and different versions of the protective relay with visual aids.
Indicates the location of the nameplate on the protective relay.
Identifies and explains the safety markings used on the product according to DIN EN 60255-27.
Details the packaging methods used to protect the product during transport and storage.
Addresses property damage risks from incorrect stacking and crate handling.
Explains mandatory shipping pictograms for safe transport and storage.
Provides instructions and warnings for safe transportation and receiving procedures.
Gives guidance on proper storage conditions for both dried and non-dried packaged goods.
Outlines procedures for unpacking and inspecting shipments for damages.
Guides the user through the process of installing and connecting the protective relay in piping.
Details requirements for electrical protection and circuit connection for the relay.
Describes steps to check the protective relay's function before installation.
Lists essential requirements for correct installation of the relay in the piping system.
Explains how to properly make the electrical connections for the protective relay.
Provides procedures for checking the protective relay's functionality before commissioning.
Detailed steps for testing the protective relay before transformer commissioning.
Specific steps for checking the protective relay model RS 2004 functionality.
Describes procedures following a protective relay trip and transformer re-commissioning.
Addresses fault scenarios when the flap valve is in the OPERATION position.
Details actions to take when the flap valve is in the OFF position.
Outlines steps for safely re-commissioning the transformer after a trip event.
Specifies the inspection plan and actions for monitoring the protective relay.
Lists technical data for the protective relay variant with a CO change-over contact.
Describes protective relays equipped with multiple independent dry-reed magnetic switches.
Covers safety requirements for electrical tests related to measurement and control equipment.
To Next Page
General