MARINE RADIO CO.,LTD.
주/선박무선
Subject : Auto Exchanger Page : (14 / 46)
Date : 2010.10.13 Doc. : MCX-5000S_ENG_R1
(QAS-ADD-008/1/10.10.13) manual\pabx\mcx-5000S\MCX-5000S_eng.doc
(
MARINE RADIO CO., LTD.)
MRC
2. Connection with Peripheral Device
2.1 Connection to External Alarm Buzzer
In the auto-exchanger, there are buzzer terminals as follow
-1. Be careful of that wrong connection of terminals(+, -).
2.2 Connection to Master Clock or GPS
For wakeup call or time identify inside PABX, the time synchronizing is needed to connect between
PABX and GPS or master clock interface as NMEA-0183 signal format.
2.3 Connection to Public Address System
In the auto-exchanger, there are 8 terminals as follow
-1. Line L1, L2 is voice signal output, A1(Dial 8) and COM operate paging of public address system.
To Next Page
Loading...