MRC MCX-5000 Series - Page 95

MARINE RADIO CO.,LTD.
주/선박무선
Subject : Auto Exchanger Page : (35 / 44)
Date : 2010.10.06 Doc. : Matex-2000_ENG(Rev. 1.0)
(QAS-ADD-008/0/09.09.25) manual\pabx\matex-2000\Matex-2000_eng.doc
( MARINE RADIO CO., LTD.)
MRC
C) Trunk feature settings (forwarding, voice)
A: day⇒0:voice guide, 1: group rings, 2: auto-search
B: night⇒0: voice guide, 1: group rings, 2: auto-search
CCCC: (day) extension number or station group number
DDDD: (night) extension number or station group number
EEE: trunk ⇒ related trunk port number
1.3.7 Specify the group ring
A) Example: if phone call to 204, a group of 204, 207 and 250
simultaneous ringing
**35* use * the extension group * the extension number *
**35* 1 * 3 * 204 * (tone) 207 * (tone) 250 *
B) Setting up group calls Ext (refer to E1 DID group setting)
** 87 * Extension group * Call number * Receive rank * Bell type *
** 87 * 4 * 204 * 0 * 1 *
1.3.8 Priority Call
A. Program Setting Example: At extension 202,204 in step with
all the numbers interruptible.
a) Barge to allow any extension number (refer to listen to the call setup)
** 34 ** OFF * allow an extension number
** 34 * 0 * # # # # * ... ...
** 34 * 1 * 202 * 204 *
b) 202,204 times set interruptible.
** 33 * Use the * extension number *
** 33 * 1 * 202 * 204 *
B. Use: * 60 * extension number *
1.3.9 Call pickup group
A. Function: Using the # button, the operator can be a response.
A: Existence ⇒ 0: off, 1: use
BB: Group Settings ⇒ 00 ~ 29 groups
CCCC: extension number
B. Use: “* + # “
**00*000000**
**41*AB*CCCC*DDDD*EEE*
**00*000000**
**35*A*BB*CCCC*
**00*000000**
**87*AA*BBBB*CCC*D*
**00*000000**
**33*A*BBBB*
**00*000000**
**34*A*BBBB*
**00*000000**
**32*A*BB*CCCC*