MRC MCX-5000A - Page 94

MARINE RADIO CO.,LTD.
주/선박무선
Subject : Auto Exchanger Page : (34 / 44)
Date : 2010.10.06 Doc. : Matex-2000_ENG(Rev. 1.0)
(QAS-ADD-008/0/09.09.25) manual\pabx\matex-2000\Matex-2000_eng.doc
( MARINE RADIO CO., LTD.)
MRC
3. CCC: Trunk port
ii. 096 trunk ports are set to default '000 'Trunk Group Releases
** 42 * OFF * group number * Port number *
** 42 * 0 * 0 * 096 *
iii. Trunk port 096 '001 'trunk group specified in (refer to Trunk Group Setting)
** 42 ** group number * port number used
** 42 * 1 * 1 * 096 *
5. Function Description: Trunk call volume is divided into groups
depending on the use of extension
6. A: Existence ⇒ 0: off, 1: Using a Group 2: Use more than one group
7. BBB ... BBB: using group number ⇒ 1 group: 001, Multiple group: 001 002 003 (up to 5 groups, can
be used)
8. CCCC: extension number
iv. At extension 202, , '001 'set to trunk group (refer to Trunk
Group Extension Set)
** 43 * 1 * Use the trunk group * extension number *
** 43 * 1 * 1 * 202 * 204 *
B) For outgoing call
a. From external phone extension number changes
Example: From the outside telephone number 202 204 => 205 changes
b. 202 204 From outside the phone off trunk group (39. Trunk Group Extension Set)
** 43 * * OFF * Trunk Group Extension Group *
** 43 * 0 * 1 * 202 * 204 *
c. Outgoing trunk group 205 external telephone set (39. Trunk Group Extension Set)
** 43 * 1 * Use the trunk group * extension number *
** 43 * 1 * 1 * 205 *
1.3.6 Receiving external calls
A) Related items:
Example: extension 205, 206 received a phone call outside.
a) For the station group is set to receive. => Ex. Extension Group '3 '(refer to ext. group setting)
*** 35 * extension number * use * the extension group
** 35 * 1 * 3 * 205 * (tone) 206 *
b) Trunk port-receiving group setting (37. Trunk feature settings (forwarding, voice))
*** 41 * Day / Night bell receiving: week extension group Ext groups * night * Trunk Ports
** 41 * 11 * 3 * 3 * 096 *
c) Receive external phone number changes such as an external phone to receive 205,206 => 202,205
changes
d) 206 off the outside receiver group (refer to Ext group setting)
** 35 * OFF * * Extension group * Extension
** 35 * 0 * 3 * 206 *
e) Receive a group setting outside of 202
* ** 35 * use * the extension group * extension number *
** 35 * 1 * 3 * 202 *
B) Extension Group set
A: Existence ⇒ 0: off, 1: use
BB: Group Settings ⇒ 00 ~ 29 groups (30 different groups can be specified)
CCCC: extension number
**00*000000**
**42*A*BBB*CCC*
**00*000000**
**43*A*BBB…BBB*CCCC*
**00*000000**
**35*A*BB*CCCC*