MARINE RADIO CO.,LTD.
주/선박무선
Subject : Auto Exchanger Page : (19 / 44)
Date : 2010.10.06 Doc. : Matex-2000_ENG(Rev. 1.0)
(QAS-ADD-008/0/09.09.25) manual\pabx\matex-2000\Matex-2000_eng.doc
(
MARINE RADIO CO., LTD.)
MRC
2.15 Connection of auto-exchanger and each telephone (LC-212A/B, Desk/Wall type)
Telephone set individually connected to the line connect as shown bellow.
For the internal wiring (L1, L2) change, assign of telephone number is depended on the
number of I/O card. The card has 24-line per one.
2.16 Connection of telephone for flush type telephone. (LC-215A/215AS/215AW)
-1. Only the connection is applicable to inserted signal relay box in telephone set.
-2. And the system can be connected peripheral bell or lamp if need.
-3. Connect to the wiring as shown bellow.(Power Source / Bell & Buzzer : DC24V only)
2.17 Connection of telephone for external bell. (LC-213A~G1,LC-215C )
-1. Only the connection is applicable to inserted signal relay box in telephone set.
-2. And the system can be connected peripheral bell or lamp if need.
-3. Connect to the wiring as shown bellow.(Power Source / Bell & Buzzer : AC or DC)
To Next Page
Loading...