MRC MCX-5000B - Page 8

MARINE RADIO CO.,LTD.
주/선박무선
Subject : Auto Exchanger Page : (7 / 46)
Date : 2010.10.13 Doc. : MCX-5000S_ENG_R1
(QAS-ADD-008/1/10.10.13) manual\pabx\mcx-5000S\MCX-5000S_eng.doc
( MARINE RADIO CO., LTD.)
MRC
3.5 Function
-1. Standard Function
a.
Inter - Communication
b.
External Call, Lines Trunk(Satcom etc)
Ex
:12 ---------- Satcom
13 ---------- Trunk No.1
14 ---------- Trunk No.2
15 ---------- Etc
c.
Paging Call to P/A System
Ex
: 0 ----------- Paging Call
8 ----------- Group 1(Deck)
9 ----------- Group 2(Engine)
d.
Call Transfer for Trunk Line
e.
Add-On Conference(Max. 6 Parts)
f.
Camp-On
g.
Group Call
Max. 10 Group, Max. 10 Line Phone per 1 Group
h. Self Ring Test
i. Warning of Off Hook Alarm
j. Automatic Change to Emergency Power
k. Failure Warning and Display
-2. Options
a) Restriction of Call or Others
b) Priority Class (Option)
Priority Call can be assigned to five levels; "1, 2, 3, 4, 5". The highest level is 1, the second level is 2,
and the lowest level is 5. The same or lower level can be interrupted but the highest level cannot be
interrupted.
Table of level for priority call
Level for priority Level Code Explanation Etc
1 90
No.1 is highest level for priority call
No.5 is lowest level for priority call.
Authorization for priority call.
1) Higher level -> Lower level : Interrupt OK
2) Lower level -> Higher level : Interrupt impossible.
3) Same level : Interrupt OK
* This function will be available after fully
set "priority call function" from front LCD panel
2 70
3
50
4 30
5
10
a. Restriction of Trunk calls(Ex : Satcom.)
b. Paging Call
c. Priority
d. Wake up Call [No.1(Once), No.2(repetition)]