MrCool SMART CONTROLLER - Access Wi-Fi Settings; Connect to MRCOOL Controller Wi-Fi

Step 3: Tap the ‘Wi-Fi Settings’ button as shown in the
red border.
Step 4: Connect your phone to MRCOOL Smart
Controller Wi-Fi (SmartHVAC_BI03_xxxxxx).
Note: If you can not find a Wi-Fi that starts
with SmartHVAC_BI03_xxxxxx, Power off the AC
from the mains and power it on again after
few seconds OR press LED button on your mini
split remote control 7 times within one minute.
Now connect to the Wi-Fi that starts
with SmartHVAC_BI03_xxxxxx.
Step 5: Go back to ‘SmartHVAC’ App.
11
STEP 3B: REGISTRATION - ANDROID USERS (CONT’D)