STEP 3A: REGISTRATION - iOS USERS(CONT’D)
7
Step 3: Go to your phone’s Wi-Fi settings.
Step 4: Connect your phone to MRCOOL Smart Controller
Wi-Fi (SmartHVAC_BI03_xxxxxx).
Note: If you can not find a Wi-Fi that starts
with SmartHVAC_BI03_xxxxxx, Power off the AC
from the mains and power it on again after few
seconds OR press LED button on your mini split
remote control 7 times within one minute.
Now connect to the Wi-Fi that starts
with SmartHVAC_BI03_xxxxxx.
Step 5: Go back to ‘SmartHVAC’ App.
To Next Page
Loading...